Aprvtio ALD-200 AC Refrigerant Leak Detector for HVAC, Car, Refrigerator

2 sold in last 8 hours
ALD-200

Spring Sales 2023

$199.99 $129.99
customers are viewing this product

Aprvtio ALD-200 Refrigerant Gas Leak Detector is a powelful and economic HVAC tool, which is equiped with sensitive sensor, big display screen, easy-operate buttons and hand-held shapes. The freon leak detector uses the heated diode detection principle. Maximum sensitivity up to 0.14oz/yr and response time is less than 3 seconds. ALD-200 is equipped with large LCD screen, so that the test results are more intuitive. The exclusive design of appearance is in accordance with human body mechanics to make it the best experience for users.

Refrigerant Gas Leak Detector

Key Features
  • Advanced Heated Diode Sensor: The freon detector is equipped with High-precision heated diode sensor with less interference from other gases (compared to corona sensor). It can quickly identify all halogenated refrigerants including CFCs, HFCs, HCFCs, HCs, HFOs and mixed refrigerants such as R11/R22/R404a/R410a/R600a/R1234yf
  • Easy to Operate:With five-key design and it allows to fast reset, mute, power on/off, adjust sensitivity, mark the peak value of leakage and makes LED screen visually display the leakage level and device status in one simple click.
  • Three Sensitivity Adjustments: The refrigerant gas leak detector can detect all kinds of halogen gas leakage in three sensitivities(L-M-H) adjustment and response the results in real time.
  • High Efficiency: The detector warms up in the 30s and respond in 3s; Maximum sensitivity up to 0.14oz/yr. The built-in 3000mAh rechargeable battery provides continuous 6 hours working time.
  • Worries Free Gas Detector:We offer 7*24 services and one-year warranty for the heated diode gas leak detector.

Heated Diode Sensor

High-precision heating diode sensor, Refrigerant Halogen Leak Detector can help you quickly identify all halogen refrigerants including but not limited to:

CFCs: R11, R12, R500, R503, etc.;

HFCs: R125, R134a, R404a, R410a, etc.;

HCFCs: R22, R123, R124, R502, etc.;

HCs category: R600a, R290, etc.;

HFOs: R1234yf, etc.;

Mixed refrigerants such as: AZ-50, HP62, MP39, etc.

 

Recharging Battery

Charging current: 5VDC 1A

When the battery is charged, the power indicator is as follows,

Charging status indication

Red light: charging

Blue light: charge is complete

Need to charge the battery when long time no use to prevent self- discharge reduced battery life. The longest storage time is no more than 6 months.

 

The alarm of leakage

The detected leakage intensity is proportional to the buzzer sound frequency. At the same time, the LCD screen bar graph will show the leakage intensity from bottom to top.

Visual tracking of the entire refrigeration system (all piping, hoses, fittings,

couplings, service valves, etc.) looking for lubrication oil leakage, damage and

corrosion signs, If it is present, may be a leak point.

 

Parameters

Sensor Type Heated Diode
Battery included YES
Battery Capacity Required Li-3000mA/h
Sensor Life ≥ 500 hours
Minimum Sensitivity 0.14oz/yr
Rechargeable YES
Working time continuous 6H
Charging time 4 hours
Weight 415g (14.6oz)
Size 7.9 "* 3.3" *1.5"

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
W
William Weir
Great tool for finding a leak in the AC system

Wish I wouldve had this tool 20 years ago helps finding those very small leaks

L
Lance Totter
nice product

Easy to set up/install. Working great thus far!

H
Haley Fox Blog
Very Nice Gas leak Detector

Im super impressed with this detector. This unit is very simple and easy to use. It will detect leaks in virtually all types of Freon systems. Very well made and a great bargain compared to what a service technician or a mechanic would charge for the same test. Highly recommend this unit.

R
Robbyg
It works at detecting 134a gas very well.

I used this to sniff out a leak on a old salt water fish tank chiller that I had in the garage. I had replaced it because it had a leak that I just never could find. Since I got this unit I decided this would be the perfect test. I put a pound or so of 134A gas back in the chiller and started sniffing around and within 1 minute it was confirming that the leak was coming from a copper line that was hard to reach to by hand. I then teared the unit down and used some soapy water in a squeeze bottle. Sure enough the leak was coming from a soldered joint near the compressor. So yes it works and works well.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
W
William Weir
Great tool for finding a leak in the AC system

Wish I wouldve had this tool 20 years ago helps finding those very small leaks

L
Lance Totter
nice product

Easy to set up/install. Working great thus far!

H
Haley Fox Blog
Very Nice Gas leak Detector

Im super impressed with this detector. This unit is very simple and easy to use. It will detect leaks in virtually all types of Freon systems. Very well made and a great bargain compared to what a service technician or a mechanic would charge for the same test. Highly recommend this unit.

R
Robbyg
It works at detecting 134a gas very well.

I used this to sniff out a leak on a old salt water fish tank chiller that I had in the garage. I had replaced it because it had a leak that I just never could find. Since I got this unit I decided this would be the perfect test. I put a pound or so of 134A gas back in the chiller and started sniffing around and within 1 minute it was confirming that the leak was coming from a copper line that was hard to reach to by hand. I then teared the unit down and used some soapy water in a squeeze bottle. Sure enough the leak was coming from a soldered joint near the compressor. So yes it works and works well.

You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
Top
ic-expand
ic-cross-line-top